EnglishChinese
HOME INTRODUCTION MAIN PRODUCT PRODUCTS NETWORK JOIN US CONTACT MESSAGE
>>SPECIFICATION<<
Mazut M100 GOST 10585/75
SPECIFICATION

 

COMPONENTS
RESULTS
Ash content, not more %
0,14
Mass fraction of suplhur, not more %
     -low ¨C suplhur ¨Cn residual ¨Coil
 
0,5
Temperature of the flash, not less ºC
- In the closed crucible
- In the open crucible ºC 110 min
110 min
The temperature of solidification, not higher ºC
25
Kinematics viscosity
118 max
Water content
0.5%
Mechanical impurities
Lower than  0.1%
Acidity
Lower than 5 mg KOH/ 100ml
Alkalinity
nil
Gross Calorific Value Kcal/kg / KJ/kg
Min9700/41300
Density at 15.0 ºC Kg/l
0.8900-0.9200
Hydrogen Sulfide Content (H2S) pom
0.5 max
Carbon Residual
Lower than 7%
Vanadium (V) ppm
23
Aluminium (Al) ppm
5
Silikon (Si) ppm
12
Nickel (Ni) ppm
29
Asphaltenes m/m
3.6%
Destilation @4 mm Hg
 
Extracted to 760 mm Hg
 
Initial Boiling Point ºC
216
       5% recovered ºC
259
       10% recovered ºC
310
        20% recovered ºC
358
30% recovered ºC
445
40% recovered ºC
502
50% recovered ºC
534
60% recovered ºC
538
       75% recovered ºC 545
545
       80% recovered ºC -
-
       90% recovered ºC -
-
Final Boiling point ºC
550
Percent Recovered vol
78%
Residu vol
22%
Total Nitrogen m/m
0.192%
Sodium (Na) ppm
15

Copyright © 2000-2010 Hanker International All rights reserved.
Tel:+0086-633-2201637 2201627 2201617 Fax:+0086-633-2201647
Add:3/F.,Dongwei Edifice,Haibin 2 Road,Rizhao,Shandong,China
E-mail: hankercn@hankergroup.com hanker@hankergroup.com hanhai@hankergroup.com